|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Data Sheet SML-21 Series 2012 0805 2.0 1.25mm t=0.8mm Features Abundant color variations with diverse luminous intensity types Color Type V W U M D P Y Specifications Part No. Absolute Maximum Ratings (Ta 25 ) Electrical and Optical Characteristics (Ta Emitting Power Chip Forward Voltage VF Reverse Current IR Dominant Wavelength D Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min.*3 Typ. Max.*3 PD(mW) IF(mA) IFP(mA) VR(V) Topr( ) Tstg( ) Typ.(V) IF(mA) ( A) VR(V) (nm) (nm) (nm) IF(mA) AIGaInP 75 30 2.05 on GaAs 60*1 4 -30 to +85 -40 to +85 100 4 625 630 635 GaAsP 70 25 20 20 on GaP 2 Red 5 -40 to +100 -40 to +100 10 5 611 615 619 75 30 100*2 AIGaInP on GaAs Orange GaAsP on GaP 44 75 44 70 75 AIGaInP on GaAs 44 Yellow 75 44 GaAsP on GaP GaP Yellowish Green Green 70 25 2.2 557 560 563 1.4 4 3:Reference 1:Duty1/5, 200Hz / 2:Duty1/10, 1kHz / 20 30 20 25 30 20 30 20 60*1 4 -30 to +85 -40 to +85 2.1 20 567 570 573 20 100*2 2 5 -40 to +100 -40 to +100 1.8 2.05 1.8 2 20 2 100 4 2.2 3.6 6.3 16 20 584 587 590 20 10 5 587 590 593 2 20 2 1.4 22 1.4 4 63 4 2 20 2 20 112 224 60*1 4 -30 to +85 -40 to +85 1.8 2 1.8 2.05 2 20 100 4 602 605 608 2 0.9 2.2 2.5 6.3 20 2 615 620 625 2 20 25 ) Luminous Intensity IV Min. Typ. (mcd) (mcd) IF(mA) 22 1.4 71 0.9 25 63 4 140 2.5 63 2 20 20 SML-212VT SML-210VT SML-212U2T(A) SML-211UT SML-212DT SML-211DT SML-210DT SML-212WT(A) SML-211WT SML-212YT SML-211YT SML-210YT SML-210MT SML-210PT Dimensions 2.0 1.4 Recommended Solder Pattern Viewing Angle SML-21 Series Angular Displacement (deg) Directivity (deg) X Y Angular Displacement (deg) Directivity (deg) X' Y' 20 30 40 50 10 0 10 20 30 40 50 60 70 80 20 30 40 10 0 10 20 30 40 50 60 70 80 1.1 1.25 50 60 70 80 90 100 50 0 50 60 70 1.25 80 90 100 50 0 50 Cathode mark 90 100 90 100 RELATIVE LUMINOUS INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE LUMINOUS INTENSITY (%) RELATIVE INTENSITY (%) 0.25 0.8 1.2 Terminal Tolerance : 0.1 unit : mm unit : mm www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 1.25 1.1 1/2 2010.05 - Rev.A SML-21 Series Electrical Characteristics Curves Forward Current-Forward Voltage Ta=25C 100 FORWARD CURRENT IF (mA) 10 10 FORWARD CURRENT IF (mA) FORWARD CURRENT IF (mA) SML-212VT SML-212DT SML-212YT SML-212U2T(A) SML-212WT(A) 100 Ta=25C SML-211UT SML-211DT SML-211WT SML-211YT Ta=25C 100 SML-210VT SML-210DT SML-210YT SML-210MT SML-210PT 10 1 1 1.5 2.0 2.5 0.1 1.5 2.0 2.5 1 1.5 2.0 2.5 FORWARD VOLTAGE VF (V) FORWARD VOLTAGE VF (V) FORWARD VOLTAGE VF (V) Luminous Intensity-Atmosphere Temperature 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) SML-212VT SML-212DT SML-212YT SML-212U2T(A) SML-212WT(A) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=2mA SML-211UT SML-211DT SML-211WT SML-211YT 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA SML-210VT SML-210DT SML-210YT SML-210MT SML-210PT -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE Ta (C) ATMOSPHERE TEMPERATURE Ta (C) ATMOSPHERE TEMPERATURE Ta (C) Luminous Intensity-Forward Current 1.5 Ta=25C RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) 10 8 6 4 2 0 0 5 10 15 20 1.0 RELATIVE LUMINOUS INTENSITY (a.u.) SML-212VT SML-212DT SML-212YT SML-212U2T(A) SML-212WT(A) 12 Ta=25C SML-211UT SML-211DT SML-211WT SML-211YT 1.5 Ta=25C SML-210VT SML-210DT SML-210YT SML-210MT SML-210PT 1.0 0.5 0.5 0 0 5 10 15 20 0.0 0 5 10 15 20 25 FORWARD CURRENT IF (mA) FORWARD CURRENT IF (mA) FORWARD CURRENT IF (mA) Derating (mA) (mA) (mA) 40 MAXIMUM FORWARD CURRENT MAXIMUM FORWARD CURRENT 30 20 MAXIMUM FORWARD CURRENT SML-212VT SML-212DT SML-212YT SML-212U2T(A) SML-212WT(A) 30 SML-211UT SML-211DT SML-211WT SML-211YT 30 SML-210VT SML-210DT SML-210YT SML-210MT SML-210PT 20 20 10 10 10 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (C) AMBIENT TEMPERATURE Ta (C) AMBIENT TEMPERATURE Ta (C) www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. 2/2 2010.05 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of SML-212VT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |